VEGAPULS 64 80Ghz Radar TLI

Featured Specifications

  • Non-contact measurement - no moving parts
  • Lifecycle cost-effective alternative to differential pressure, floats and displacers
  • 2-wire technology reduces wiring costs and allows easy implementation into existing systems
  • No need to perform manual soundings by ship’s crew
  • Easy on-site operation and indication via PLICSCOM menu-driven display
  • Calibration can be performed via laptop personal computer without having to enter the tank or remove device
  • Fluent across all communication protocols: 4-20ma/HART, PROFIBUS PA, FOUNDATION Fieldbus

Description

The VEGAPULS 64 is a sensor for continuous level measurement of liquids. With small tanks or in case of narrow space the small process fittings offer special advantages. The very good signal focusing enables the use in vessels with many installations such as e.g. stirrers and heating spirals. The PULS64 operates on the 80GHz transmission frequency. This allows a 3 degree radar beam - the narrowest beam available for tank level indication. A 3 degree radar beam can avoid obstacles in the tank, is unaffected by debris on the tank walls, and will only reflect off the surface of the liquid in the tank. When it comes to no-contact level measurement of liquids in small containers, smaller is better. The PULS64 offers the smallest sensor of it's kind in the TLI market, a wide range of process fittings, and a 3 degree focused radar beam. The PULS64 is perfect for smaller tanks.

Technical Specifications

Technical Data

Measuring Range

30 m (98.43 ft)

Process Fitting

Thread from G¾, ¾NPT,

flanges from DN 50, 2”, mounting strap,

adapter flanges from DN 100, 4”

Deviation

≤ 1 mm

Environmental

Process Pressure

-1 to 25 bar (-100 to 2500 kPa/ -14.5 to 362.6 psig)

Process Temperature

-196 to +200 °C (-321 to +392 °F)

Ambient, storage, and

transport temperature

-40 to +80 °C (-40 to +176 °F)

Electrical

Operating Voltage

12 to 35 VDC

Electonics Versions

4 to 20 mA/HART

HART

Power Pack

Materials

Wetted Parts

316L, PP, PTFE, or PEEK

Display

LCD in dot matrix

Process Seal

FKM, FFKM, EPDM, or PTFE

Housing

Plastic, Stainless Steel, or Aluminum

Protection Rating

Up to IP68 (1 bar)

Downloads

Leave a Reply

Your email address will not be published. Required fields are marked *