VEGASWING 63 Extended Point Level Switching TLI
Featured Specifications
- Small size sensing fork with insertion length of 1.57” allows for use in almost any liquid level application
- Operates in high temperatures, up to 482 degrees Fahrenheit
- Durable with a variety of materials, which results in reliable measurements in the most arduous process conditions
- Mechanically fastened crystals ensure a rugged and effective Piezo Drive
- Fully modular plics® design with plug-in electronics can be easily changed to provide different output signals, making installation and wiring a breeze
- Variety of available outputs meets all needs for input into many control systems
- Two-wire, loop-powered option affords the most cost-effective wiring solution
Description
VEGASWING 63 VIBRATING POINT LEVEL SWITCH
Operating on a principle of Piezo vibration, the VEGASWING vibrates the fork at the end of the sensor. When the fork is covered by product, the frequency of the forks vibration changes. The VEGASWING 63 detects this change and triggers a switching command. In order to prevent overfilling of the ballast tanks, the pumps or blowers have to be switched off quickly. The VEGASWING 63 vibrating level switch is a wear- and maintenance-free sensor and is the ideal solution for adjustment-free level detection in the ballast tanks. The VEGASWING 63 can also be used where high or low level detection of liquids is required, including such applications as towers, sumps, tanks and pipes.
Technical Specifications
|
Technical Data |
|
|
Process Pressure |
-1 to +64 bar / -100 to +6400 kPa (-14.5 to +928 psig) The function of the instrument is ensured up to an operating pressure of 100 bar/10000 kPa (1450 psig) at a maximum process temperature of +50 °C (+122 °F) (only with threaded versions). |
|
Process Temperature |
-50 to +250 °C (-58 to +482 °F) |
|
Viscosity - dynamic |
0.1 to 10000 mPa s |
|
Density |
0.7 to 2.5 g/cm³ (0.025 to 0.09 lbs/in³) 0.5 to 2.5 g/cm³ (0.018 to 0.09 lbs/in³) by switching over |
|
Ambient Temperature |
40 to +70 °C (-40 to +158 °F) |
|
Hysteresis |
approx. 2 mm (0.08 in) with vertical installation |
|
Process Fitting |
Threads from G¾, ¾ NPT, flanges from DN 25, 1”, hygienic fittings |
|
Electrical |
|
|
Operating Voltage |
20 to 253 V AC, 50/60 Hz; 20 to 72 V DC |
|
Power Consumption |
1 to 8 VA (AC), approximately 1.5 W (DC) |
|
Switching Voltage |
max. 253 V AC/DC |
|
Switching Current |
max. 3 A AC (cos phi > 0,9), 1 A DC |
|
Breaking Capacity |
min. 50 mW, max. 750 VA AC, 40 W DC (with U < 40 V DC) |
|
Materials |
|
|
Wetted Parts |
Stainless Steel 316L |
|
Display |
LCD in dot matrix |
|
Process Seal |
Klingersil C-4400 |
|
Housing |
Plastic, Stainless Steel, Aluminum |
|
Protection Ratings |
Up to IP67 |
|
Approvals |
|
|
SIL Qualification |
Optionally up to SIL 2 |
|
Ship Approval |
GL, LRS, ABS |
|
Hazardous |
ATEX, FM, CSA, IEC |
